Rugs are a great feature for adding warmth, color, and character to any room. This is often the case if you have hardwood floors and want soft places to sit or for the kids to play games on.
But just like carpets, rugs are prone to picking up dirt and dust or stains on a daily basis. This is why it is important to know how to clean your carpet and make it look brand new.
Because rugs come in all kinds of materials, shapes, and sizes, it can be difficult to know how to clean the rug without damaging it. Fortunately, there is a simple way to clean your carpets carefully, which will keep them looking and looking their best. Best of all, you won’t have to spend a fortune on cleaning products, as you can easily use the items you already have in your kitchen cupboard. So, if you want a clean carpet, follow these tips on how to clean your carpet and make it look brand new.
If your carpet is looking worse with wear and tear, here’s how to clean your carpet with or without a carpet cleaner. Or, you can always hire or purchase a carpet cleaner if all else fails, too. If you have stains on leather items, check out how to clean leather to restore its shine.
How to clean a rug
Before you begin, always check the carpet care label to see if it should be hand washed, dry cleaned, or spot clean only.
1. Vacuum the rug
Or not, rug vacuum completely with no one The best vacuum cleaners. Use this to remove loose dirt, dust, crumbs, or other debris on a surface area. It is also advisable to thoroughly vacuum the bottom of the rug, as this hides a lot of dust and dirt.
2. Take the mat outside
If you have an outdoor space, spread it out and prop the rug on a fence or railing for support. With a broom or large hand, hit the sides of the rug to get rid of excess dirt. Repeat this until you no longer see any clouds of dust coming out of the carpet. Keep in mind, if your rug has a latex backing, excessive beating can damage the latex.
3. Mix the cleaning solution
if you want Make your own cleaning productSimply mix two cups of mild liquid dish soap in a bucket of warm water. Avoid using hot water as this may loosen or even damage the fibers. Always remember to test the solution on a small area of the carpet first to make sure it does not stain or damage the surface.
4. Work the cleaner into the carpet well
Next, place your rug on a surface or on top of a piece of cloth on the floor. Before fully cleaning your rug, Test the solution on a small area of the rug first, to make sure the colors don’t bleed. Then using With a soft-bristled sponge or brush, gently work the solution into the carpet Until you start to see suds. An easy way to do this is to visualize the rug into four sections and rub each section well before moving on to the next.
Hint: If you see that colors bleed from a stain test, it’s best to take the carpet to a dry cleaner.
5. Let the solution sit before rinsing it off
then, Leave the solution on the carpet for about five minutes And let it work, before Rinse it off with a hose or a bucket of clean water. You want to make sure that you are thoroughly washing away any dirt or soap residue. Alternatively, you can use carpet shampoo for your rugs, but always follow the directions on the label. To tackle stains, we recommend Dr. Beckmann Carpet Stain Remover ($11 (Opens in a new tab)And the Amazon (Opens in a new tab)), for a clean carpet.
6. Allow the rug to air dry
then, Use a towel to absorb excess water Before hanging it to dry in the open air. If you don’t have an outdoor space, leave them to dry in the laundry room, garage, or basement. Keep in mind that this can take up to 24 hours or longer, so always wait for it to dry completely before returning it to the floor.
Other types of rugs
For jute, sisal, and bamboo rugs, avoid washing them with water as this will weaken and destroy the fibers. Instead, clean the top, bottom, and bottom of the rug to keep it clean. However, if you find stains, just use a homemade solution of laundry detergent and warm water. Carefully blot the stain with a microfiber cloth before rinsing it clean. Then pat dry with a cloth and leave to air dry.
Also, if you have a large area or antique rug, it is a good idea to seek the advice of a professional carpet cleaning service to ensure that it is properly cleaned.
How to remove stains from a rug
If you have ugly spots like the dreaded Red wine spill On your white rug, don’t panic. Simply mix a 50/50 solution of water and white vinegar, put it in a bowl and dip a sponge in it to treat the stains. Alternatively, you can pour it into a spray bottle for easy application. Leave the mixture on the surface for a few minutes before blotting the stain with a clean towel or cloth.
How to remove odors from a rug
If your rug starts to smell bad from spills, food, or pets, sprinkle a layer of baking soda over the rug. Leave it for 15 minutes before vacuuming it up. Baking soda is a natural deodorizer that eliminates unpleasant odors and gets rid of stains. For more top tips, check out What makes baking soda and vinegar so good at cleaning? around the house.
Do you have more than just wine stains that need to be removed? Well, here’s how to remove oil stains from clothes without damaging them. And learn how to clean a leather sofa to remove everyday stains. Also take a look at 11 things you didn’t know you could clean with toothpaste.
[ad_2]
