Whether you want to decorate a dated room or one accent wall, you’ll need to know how to make room wallpaper like a pro. In fact, once you learn how to wallpaper the right way, you can easily transform a space to make the walls a stunning focal point.
But while you might want to call in the designers, it’s actually not that hard to figure out how to wallpaper in a room. learning style How to paint a room like a proThe key is to follow a few basic steps to get the best results. If the walls are not done correctly, it will lead to uneven or mismatched and embossed wallpaper. Furthermore, removing the papers to start over will only cost you more time and money, especially if you’ve already ruined your designer roll!
So if you want to learn how to make wallpaper like a pro, follow these top tips to add glamor to your home and save money in the process.
If you enjoy renovating your home on a budget, check out how to paint kitchen cabinets for a transform or how to remove paint from carpet if you have any messy spills.
How to wallpaper a room
Before you start decorating, move all furniture out of the way and dust sheets to protect the floor from dirt.
1. Preparing the walls
What will you need
dust sheets
staircase
Bucket
sugar soap
sponge or cloth
pencil
Paste table
tape measure
trimming wheel
Retractable decorative knife
spirit level
wallpaper scissors
wallpaper paste / adhesive
wall hanging brush
seam roller
First, turn off the electricity to remove any wall panels, sockets, and decorative fixtures to create a blank canvas. Use masking tape to cover and protect electrical outlets and switches. Remove any bits of old wallpaper with a scraper or putty knife, and sand any uneven burrs to a smooth surface.
Next, clean the walls with sugar soap or an all-purpose cleaner to remove dirt, dust or residue and dry them completely. This will help the wallpaper to stick properly. Check for any cracks or holes in the wall and fill them with suitable grout.
2. Measure the wall and cut the wallpaper
Measure the height of your wall with a tape measure, adding 10 cm (about 4 inches) to allow for cuts at the top and bottom. Then roll the wallpaper with the pattern side down on the gluing table. Using a ruler, draw a straight line along your measurements before cutting with scissors. Use this cutting length as a guide to cut the following wallpaper pieces. For textured wallpaper, remember to place it edge to edge to properly align the patterns.
3. Paste wallpaper
Next, place the trim side down on the gluing table and allow the bottom to droop on the floor. Using a brush, apply wallpaper paste liberally down the middle of the paper first, before practicing on the edges. Once this top is glued, carefully fold it and continue gluing the other parts of the paper until the paper is completely covered. If you are using wallpaper that has been pre-adhesive, follow the directions on the product to ensure the correct hanging.
4. Fix the background on the wall
Place the first paper pasted on top of the wall. Leave about 2 inches of excess paper over the top and bottom to allow for cutting. Carefully align the wallpaper and press firmly against the wall to install it.
Using a wallpaper brush, flatten the paper down in a vertical stroke to get rid of any creases or bumps. You want to make sure the wallpaper is as smooth as possible, using enough pressure to get any bubbles out. If you encounter creases, gently pull the wallpaper away from the wall until you reach that crease, and press it out carefully. Continue hanging the sheets around the room or a specific wall, matching the pattern as you go.
5. Sealing sealing with roller
To get perfect alignment between each sheet, it is best to start from a midpoint to get as close as possible. Use a seam roller on each sheet to prevent the edges from peeling off. Try not to apply too much force, as this will compress the putty/adhesive from the bottom.
6. Trim the edges
Use a putty knife to press the wallpaper firmly against the wall, cutting off the excess paper at the top and bottom with a retractable blade. Then, brush the cut edges back in place for a neat finish.
7. Clean the seams
Finally, wipe off any excess glue along the seams with a clean rag, sponge, or rag after letting the wallpaper set for at least 15 minutes. This will leave a neat, clean surface. Now you can sit back and enjoy your new walls!
What are the different types of wallpaper?
vinyl – This is the most popular wallpaper to buy as it is easy to hang and remove as it is equipped with an adhesive. The fabric-backed vinyl fabric makes it moisture-resistant, ideal for bathrooms and basements.
engraved – This wallpaper is textured and embossed, perfect for covering bumps or any imperfections in walls. It’s lined with adhesive, and it’s easy to paint if you want to change color.
fabric based – This wallpaper is difficult to apply because you will need to hang it with clear adhesive putty. This may take a long time, but it allows for more flexibility. In addition, fabric wallpaper may be more difficult to clean, but it will look amazing and elegant.
After decorating, you’ll want to read up on how to remove stains from painted walls to make sure they stay looking stunning. For more cleaning tips, check out How to Clean a Leather Sofa and How to Remove Wine Red Stains from Carpet.
Want more advice? Also find out the 10 Things You Didn’t Know You Can Clean With Baking Soda Also Can I Use Barley Vinegar For Cleaning? – This is the best vinegar for cleaning.
[ad_2]