iPhone won’t turn on or freeze? Here is the fix.

Since so much of our daily lives are connected to our phones, it can be absolutely terrifying when your iPhone won’t turn on or charge. The common IT solution, of turning it off and back on again, definitely won’t work if your iPhone won’t turn on in the first place. Fortunately, there are products like Tenorshare ReiBoot Designed to safely restore and repair iOS systems at home.

Understandably, you’ll want to know all the possible causes and options for what to do if your phone won’t turn on before making a decision. Here’s a breakdown of everything you need to know.

Reasons to know: Why won’t my iPhone turn on?

This may seem obvious, but it’s a common trigger for a reason iPhone won’t turn on It is a lack of strength. If you decide that this is not the problem, here are some other possibilities.

• There may be a problem with the phone software, such as corruption.
• The device you are charging could be broken or malfunctioning.
• The battery health may be diminishing or it is in a deep discharge state.
• The device can be damaged or compromised, such as if there is debris in the charging port.
• You may be dealing with a system glitch caused by an update or corruption in an older version.
• An internal component may be damaged from falling or water damage.

The cause may not always be obvious, and sometimes, neither is the solution. There are many options for what to do if your iPhone won’t turn on, and it’s important to understand the difficulties, components, and risk factors of each.

Three Common Ways to Fix an iPhone That’s Not Working (Low Success Rate)

Here are the easiest and most common methods, but their success rates can be very low. If you want to fix your phone quickly and successfully without losing data, go directly to the fourth option.

1. Charge your iPhone

As mentioned before, your phone may have run out of power. Before moving on to more onerous options, this is the first thing to rule out. Connect your phone to the charger and leave it for about twenty minutes. If you do not notice any changes, then you should also try another charger, in case the primary charger fails. This option is easy and risk-free.

2. Fix iPhone with hard reset

For another easy and risk-free option, try a factory reset. This is completed by quickly pressing and releasing the Volume Up button, then doing the same to the Volume Down button, and then pressing and holding the opposite side button until the Apple logo appears on the screen.

3. Reset your iPhone via iTunes

Another option that you can try at home is factory reset, however, this will result in data loss. If losing your data is not ideal, go straight to the fourth option. If you’re fully backed up and don’t mind losing data, here’s how to do a factory reset.

1. Connect iPhone to computer using Itunes.
2. iTunes should automatically detect your device in recovery mode and suggest either an update or a factory data restore.
3. He chooses Repeatwhich will restore your iPhone to factory settings.
4. iTunes will download and install the program on your iPhone.

Easy Ways to Fix iPhone That Won’t Turn On Without Losing Data (High Success Rate)

If you want to quickly fix your phone at home without risking data loss, Tenorshare has a reliable option ReiBoot.

4. Fix iPhone won’t turn on via iOS system repair tool

The previous three options come with either low success rates or high risks of data disruption. If you are looking for a quick way to fix an iPhone that is not working, without data loss and with a high success rate, then you need to give Tenorshare ReiBoot a try. ReiBoot is an iOS repair tool that can fix more than 150 iOS problems without putting your data at risk. Here’s how it works.

1. download ReiBoot iOS System Repair Tool to your computer.

   

2. Once installed, connect your phone to your Mac or PC and open it ReiBoot.
3. tap on Begins button
4. He chooses Standard repair Then download the firmware. It will only take you two minutes.

   

5. Once the download is done, click Start the standard repair Wait while the issues are fixed.

   

6. At this point, your iPhone should boot up and not lose any data in the process.

5. Contact Apple Support for assistance

If the above 4 options don’t work for you, it’s most likely a hardware problem. This means it’s time to contact Apple Support. It is best to leave this as a last resort as it may end up being an expensive experience and/or may lead to data loss.

More fixes for common iPhone problems

Tenorshare It has a wide range of products to meet other common iPhone needs. Whether your iPhone needs to recover data, unlock passcode, or transfer WhatsApp data, Tenorshare has a product to help. the Tenorshare ReiBoot The repair tool alone can fix over 150 different system issues, such as an iPhone stuck on the Apple logo, a screen that won’t turn on, and recovery mode loop. This tool is safe, easy to use, and versatile, making it an easy choice when your iPhone won’t turn on.